These are wonderful little machines that are working hard to make rope obsolete.

How to use stanley ratchet straps. Each to tie down a load weighing 1,000 lbs., you will need at least 2 straps to safely secure the load. Ratchet straps can be confusing. Wide webbing with reinforced edges.

Pull the free end of the strap up through,. Find the slot at the bottom of the ratchet (called a “mandrel”), which holds the length of the strap. Used to clip to a vehicle’s lower trunk latch when the hatch is partially open, the clip provides an extra secure anchor point when using the stanley® safety strap;

In this video i give a tutorial on how to use, thread, and loosen ratcheting tie down straps. Safe working load limit of 1100 lbs / break strength. Straps adjust from 1 ft.

I talk through each step and show how the ratchet part works. (for example, if you are using straps with a working load limit of 500 lbs. Open the ratchet fully so it lays flat, releasing the pressure on the strap.

Pull and hold the release lever or release tab when you’re ready to remove the strap and unload the cargo. We show the basics on how to use tie downs and ratchet straps plus beginner mistakes that lead to problems. Open the ratchet until it is completely open and the.

Highly visible stanley yellow straps with reinforced edging; Follow along as joe from us cargo control shows you how to thread, tighten and loosen a ratchet strap tie down. Start by opening the ratchet handle hardware and align the opening slot of the ratchet is pointed upwards.