Make a little chisel angle by rotating your left hand in a clockwise direction.

How to sharpen drill bits with grinder. Sharpening a drill bit using a bench grinder isn’t easy! Rotate the drill bit to an angle of 180 degrees, and cool the metal bit of sharpening the other side of the drill bit. To sharpen the drill bit flawlessly, move your.

Try to sharpen both edges evenly. It is safer to turn the motor off and wait for the wheel to stop. Loosen the hold down on the bit and turn the bit one half turn.

Firmly grasp the shank with the right hand. Start the disc rotation on an angle grinder or a machine tool and. Hold the bit at a 60 degree angle to the face of the belt sander.

Sharpening a drill bit involves removing just enough metal to get a sharp edge. Do not lift the bit to look at because you lose your hand position, just twirl it. Now repeat the process 5 to 10 times.

The idea here is to remove only as much metal as needed to clean. When that cutting edge is sharp, flip the bit half a turn to sharpen the other side. Sharpen drill bits with a bench grinder.

Start by holding the tool with the left hand at the front (working part). 1) hold the drill bit so that the cutting face is parallel to the grinding wheel surface. In this video i show you how to do basic drill sharpening.