First, you need to put your two fingers between the shackles.
How to open a padlock without breaking it. You can use a hammer to crack the padlock. New locks are preset to “0000.” swing the shackle to the side. To begin, hold the lock in your left hand.
Then stick the shim or screwdriver into the hole at the front of the lock, move it around and the metal piece should. This method straight up breaks the shackle of your padlock. Place lock in the open position.
Take a pair of bolt cutters and place them around the lock's loop. Slide the straight end into your lock, right under the pins. Apply upward pressure until the center metal piece breaks.
Open the lock with your current combination. You will need two wrenches (same size and grip); There is no reason to destroy a padlock.
This is perhaps the quickest way to open a padlock when you are missing a key, but it, unfortunately, means that you will lose the use of the lock in the process. Second, you need to hold the shackle by pulling it away from the body. Please try resetting the lock again by following the instructions below:
How do you break a padlock with a hammer? Then, apply firm pressure until the loop breaks. At this point, make sure the torsion wrench in the lower part on the keyway is not getting in the way of your pick, the.