You will hear the clicking sound of the igniter.

Lighting a water heater pilot light. Continue holding the pilot button down for 60 seconds to ensure the flame stays lit. How to turn on the pilot light on a water heater. Keep the knob or pilot button pressed down as you relight the burner with a utility lighter.

The electric pilot light should be installed in the wall of the water heater room and then connected to a 120 vac circuit breaker. To light, a water heater with an electronic gas pilot, turn the gas knob to the “pilot” position. Keep holding down the pilot knob or button for at least a.

Continue to press and hold down the pilot button: When the gas burner comes on, use a 50/50 dish soap/water mix to test the screw joints for air. Tips and tricks on how to light your rv water heater!www.tricityrv.com

To reignite water heater pilot lights on these models, you need a fireplace match. You may have to press the igniter several times to get the pilot to. If it is lit, move onto the next step.

Light the pilot on older model gas water heater. If your water heater has a separate button for the. Turn the control valve to “on”.

Once the pilot is burning well, release the knob and turn it to the ‘on’ setting. Keep pressing the ignition button once per second while holding the gas control knob down. The most common reasons in my experience, for the water heater pilot light to frequently go out, are blocked air filter, dirty or malfunctioning thermocouple, and lack of.