Start at the corner of the heated tile and use a hammer and the floor scraper to cut into the.

Removing vinyl flooring tiles. Cut the vinyl flooring in half from one. This paper will probably stay stuck to the floor. The vinyl strips are much.

1.3 remove the center flooring section. 1.4 roll up the flooring. Joe hassome more vinyl floor tiles to remove so he w.

Take all the furniture and large items out of the room so you can have unrestricted access to. Expose a sheet or tile edge, so you can pry it up from underneath. For sheet vinyl flooring removal, you’ll need to take the utility knife and head to the middle of the floor where there is less adhesive in place.

As when removing the lino itself, work on a small area at a time, around 8 inches square. However, it can be a good. Now that you have applied some heat, the tile should be easier to remove.

Use your scraper to lift the paper off being careful not to. Vinyl is usually backed with paper. If you pour a small amount of water on the tiles as you remove them, the liquid will soften the glue and reduce the amount of dust that can.

With a putty knife, peel up a corner of a sheet or tile, or using a utility knife, cut into the vinyl to create access. Heat the area for a few minutes until the glue softens and then get stuck in with the scraper. 1) in the center of the room, with a utility knife, cut a hole about a foot wide into the vinyl flooring.