We will cover two method.

Liftmaster keyless entry programming. At first, you’ll have to remove the faceplate from the door opener. Enter a four digit pin of your choice and press the # button; Learn the basic steps for programming a garage door keypad for models 376lm, 376lmc, 377lm, 377lmc, 877lm, 940lm, 940d, 940estd, 976lm and 976lmc.

Most model numbers can be located on a. Liftmaster wireless keypads are the easiest way to access the garage without a key or remote control. Weatherproof and long lasting, they provide years of.

Activate your keyless entry with the 4 digit pin, hold the enter button and hold the homelink button. Mark the top mounting hole and drill l/8′ (3.2mm) pilot. Install the top screw, allowing 1/w (3.2mm) to protrude above the surface.

This article overview contains programming information for the different keyless entry models we support. Switch the mode from operate to program. Press the learn button on the receiver to the gate operator.

To program the 66lm, 377lm or 977lm keypad: Press and hold the star and the # keys until the lights on the keypad stop blinking. Position the wireless keyless entry over the top.

Press and release the learn. Exit the programming by pressing one of the other 2 buttons on the remote. Do not repeat this step to program additional homelink buttons.