While the primer dries, then start removing the damaged pieces, starting at the bottom of the affected area.

How to remove siding from the bottom. Cut off the lower coarse that you will replace. All it takes is a few minutes and a few simple tools to get access for repairs or modifications to a wall covered with this popular cladding.subscribe to our. Here are the basic steps:

Then where there are nails, slice them off so. Pull the zip tool out to disengage. Start by lifting an overlapped piece of vinyl on the top row.

With a nail puller and a hammer, pull out nails that don’t come out easily. Wait 30 minutes and then hose off. Secure the buttlock of the upper panel to the top edge of the new panel, using the zip tool.

Circular saw can regulate the depth of cut better. You should be able to slide it horizontally and remove it from the channel to expose the nails from the second row down. Starting at one end of the damaged piece, push the end of the zip siding removal tool up under the siding until you feel it hook the bottom lip.

Use a circular saw or even a multi tool. You will need a ladder and a. Remove and replace wood siding.

Start by removing any clutter, obstacles, and ground debris from your work area. Grab the lip of the buttlock with the tool and pull it over the new. Lift up the very top portion of the trim to expose the top edge of the vertical siding.