My method of putting line on a baitcasting reel.

How to put line on a baitcaster reel. Below is a summary of how to put line on a baitcaster in 7 steps: Put the line through your lowest guide loop, stick it through the small hole on your reel (the one that moves side to side), put it above the metal bar (if you have one), and tie it on your spool. You can start threading the line from the end of the rod gradually pushing the line via the loops and pushing towards the reel.

Locate your line correctly step 2: Feed line through the line. Get a friend or relative to hold the filler spool (or use a fishing reel spooler).

Start with using enough so that there’s a gap of 1.8 th of an inch between the spool and the point. Make sure that you are reeling in light. Tie an arbor knot around the spool step 4:.

Just hold your hand right in place and don't move with it. Also, it would be best if you put some gap within the top of its spool and your line so that it would cast well. Begin reeling the line, using your index finger and thumb to add some light tension to keep.

The process of knowing how to put the line on the baitcasting reel begins with learning the right kind of knot. Have the friend put a pencil or screwdriver through the eye of the fishing line spool and hold both sides. To conclude, deciding how much lines to put on a baitcaster is pretty easy.

Make sure the line is coming off the spool in the same direction that it goes on the reel. 3 how to put line on a baitcasting reel? For the first loop, you need to do it straight and tie a double uni knot.