Bring the wire around the back of the latch and out of the crack below it.

How to open a door with a paperclip. Open the door step 1:. To pick a lock with a paperclip as a beginner, do. Put the wire in the crack between the door and its frame above the latch.

With privacy locks, you just need to get the paper clip in deep enough to touch the pressure plate inside, and the door can be opened by twisting the knob. Put the tension wrench short bent part in the bottom hole. In this tutorial, we learn how to pick a locked door with a paperclip.

Tie the wire to the other. Insert the pin into the small hole on the doorknob until you reach the internal locking mechanism, then turn it to unlock the door. Anyone can unlock a door lock with a paper clip.apply very light torque to the tension wrench (you can use a pen clip as a tension wrench}, and then scrub b.

Insert the tension wrench on the bottom part of the keyhole then turn it in the right direction. Insert the pick into the door lock. Make a pick out of the paperclip.

Push your lock pick all the way into the lock until you feel it hit the rear of the keyway. Insert the tool into the keyhole and try to turn the cylinder. How to open a door with a bobby pin within 7 steps only.

Use a pin or a clip once you have located the locking mechanism, insert a paper clip into the hole and twist it until the lock pops. Without removing the tension key from the lock, insert the. First, you need to transform the paperclip into a car pick.