You can use a small snake with its tip bent about 3/4 inch or an inch.

How to make a plumbing snake turn corners. The screw is usually located on the back of the machine. If you've ever had to snake a drain and the plumbing snake got stuck in a tight corner, you know it can be frustrating. How to get a drain snake around a corner requires a bit of luck but mostly skill and patience.

They can be harsh elbows like a 90 degree bend (such as your p trap) or a smaller elbow (less than 90. Slowly insert the auger into the drain. Use a slow, steady motion.

Inserting the snake’s head into the drain and carefully pushing without turning. How do you clean a drained snake after use? The handle will have a screw on the back.

Remove the screw on the handle to open the cage. Insert & push the snake head. Debris like hair, grease, food, or anything.

Then turn the snake with. The less space you have between you and the blockage, the less chance of obstruction. How to make drain snakes turn pipe corners (5 steps) step 1:

After that, wrap one end with duct tape until secure, then attach both ends into a loop by wrapping at least once more around them all. Don't use excessive force to get it in, or you could damage the device and the drain. If you are not familiar with how to turn a plumbing snake, this article will give you some tips.