All the steps are beginner friendly and easy to follo.
How to adjust the action on a telecaster. Green energy and technology journal You will need to adjust the action so that it is low enough to play. The next step is to adjust the action of the strings.
The action is the distance between the strings and the fretboard. If the neck is too convex (strings too close to. All of a sudden i felt like i had.
If you shim or tilt the neck to lower the strings and then raise the bridge height. If the neck is too concave (action too high), turn the truss rod nut clockwise to remove excess relief. Players with a light touch can get away with lower action;
This sort of baffles me but it works. Like you would on any electric guitar really, at the bridge side and then at the saddle. There's also a host of useful nugge.
1) take the strings off. The notes played at the 12th fret should be exactly an. This is the easiest way to fix a shallow neck angle.
3) put new strings on. Don’t turn the truss rod more than 1/4 turn at a time and most likely not more than 1/2. Before you start, make a note of each string’s action.