Check if the hinges used in your storm door are the same.

Gap around door frame. Fill the gaps with expanding foam, replace the trim and use a silicon sealer to make sure that no water leaks. Attach felt pads to the bottom door edge. How to replace a garage entry door.

Spray insulating foam works very well for filling door frame gaps. Another point to note the gap on the hinge side will be governed by the hinge you use. Place the straw on the foam can and spray.

Remove the trip off the inside and outside of the door. Indeed on cheap hinges if you. Scrub the door’s edge and frame with a wet cloth to remove any buildup.

Water leaking from the top of the door frame. The gap at the bottom of an interior door should be 2 inches from an unfinished floor. Screw the sweep down against the threshold and open and close your door to test if the sweep is in the right position.

Start with the interior door side when using foam to fill large door trim gaps. What do you use to fill gaps between doors and walls? Remove the old stripping with a paint scraper from the bottom and top around the edges of the door.

Make sure the screws are tight and check if the gap problem is resolved. Inspect if there are any loose or missing screws. The gap between the door frame which is part of the door assembly and the studs are normal.