Less than 1 x 10^4 ohms to epa ground.

En 61340 5 1. The purpose of this standard is to provide the administrative and technical requirements for establishing, implementing and maintaining an esd control. 17.220.99 autres normes relatives à l'électricité et au magnétisme. 29.020 electrical engineering in general

We’ve also included some background. $133.00 on the ansi webstore Section 5.1.1] however, for working surfaces, it refers to “it is allowed, when approved by the esd coordinator, to use surfaces which are “hard ground” i.e.

This part of iec 61340 applies to activities that: Protección de componentes electrónicos frente al fenómeno electrostático. Requirements may be different for the munitions industry, explosive handling areas, hospitals, solvent stores etc.

Ad pdf or print version. Protection of electronic devices from electrostatic phenomena. This standard does not apply to electrically initiated explosive devices, flammable liquids, gases and powders.

Manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 v hbm, 200 v cdm and 35 v for isolated conductors. Manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 v hbm, 200 v cdm and 35 v for isolated conductors. Requisitos generales (ratificada por la asociación española de normalización en enero de 2017.)

The same standard requires a person/footwear/flooring to be less than 3.5 x 10 (7) ohms (resistance in series of operator plus footwear plus floor). This second edition cancels and replaces the first edition published in 2007. 31.020 electronic components in general;