First, check to make sure the well’s breaker hasn’t been flipped into the off position.

Well pump loses prime after power outage. If it is tripped then inspect the well and wiring for any sign of a short before flipping the breaker on. Then it will automatically turn back on again. If the well pump is.

There is always a rubber prime plug located at the top portion of the pump. Sounds like your foot valve is buggered. That keeps the water from bleeding back into the well, keeping your pump primed.

If your well pump is starting to lose its prime, there's a couple of things you should look out for: A leak somewhere in water lines failure of check valves air gaps in intake pipes drawdown from hose or tap left. If you have a manual pressure switch, move the arm on the switch from off to.

When you keep using water during and after a power outage, the. While you are at it, check the air pressure in your bladder tank. Check for leaks the majority of the time, if your pump is losing its prime, then it's.

To reprime your well pump, you need to disconnect the well pump from all power sources. Purchase a new foot valve, preferably constructed out of brass, and screw onto to dip tube, using teflon tape. Second, locate the switch on your well’s pump.

Steps on how to prime a well pump: Its essentially a check valve right at the bottom of your well. Our pump expert explains how to prime a well pump and what to do if you nee.