Carefully remove the hopper assembly.

Traeger auger clearing. Normally, the vacuum switch remains in line with the power that connects to the auger motor. You’ll then need to remove the shear pin, the. Keep the hardwood pellets burning with this replacement auger assembly for your d2 timberline 1300 grill.

10 easy steps to remove pellets from traeger auger 1. Using a drill attached to the end of the auger is the quickest/easiest means to resolve a jammed auger on your traeger pellet grill. If you can't find the auger pin, call customer support.

Put the auger into the auger shaft and set the bushing with the setscrew. Locate the 4 screws holding the hopper assembly on the grill and remove them (2 on either side). Empty your hopper and clear your auger every once and a while.

When pellets get wet, they expand and can clog the auger. It is a mechanical device with many moving parts. If yes, your traeger auger will struggle to turn, which means it gets jammed.

You probably know that traeger grills have variety of different pellet grill models such as traeger pro 22, traeger pro 575, and traeger ironwood 885 and few others. However, systems can fail or become. Turns out, a defective control board, auger issue, and faulty induction fan are responsible for this issue.

The first problem occurs with the vacuum switch. If the auger is just jammed and you are having trouble removing, before you go nuclear and saw the thing in half. Make sure to turn off the grill and remove the plug before you go to the auger part.