Primo water water dispenser professional 601213 quick start manual (2 pages) 2.

Primo water dispenser instructions. Remove empty water bottle from primo dispenser. Remove cap and place pump in filled water bottle. Let it soak for 10 minutes to dissolve the salt.

To do this, you will need a primo faucet with a 1/4″ male pipe thread. This process takes about 30 minutes and should be completed every three months. How to load a primo water dispenser step 1:

Once you have removed the plug, take off the water bottle and empty the water in the reservoir. The next step is to connect the fresh water and drain lines. Wait for 10 to 20 minutes.

Also ensure the main power is “on.” besides, the power cable at primo water dispenser’s back in pushed firmly into the wall socket. Connect the water bottle to the dispenser and let the vinegar or bleach fill the tank. Install the fresh water and drain lines.

Free kitchen appliance user manuals, instructions, and product support information. Ensure the power cord is connected back to the wall outlet and turn on the water dispenser. Take the water dispenser out of the fridge and place it on a protected surface.

The other option is to check that. Allow the ice in the dispenser to thaw completely. This will give the cleaning agent some time to remove all of the minerals.