You can check the appropriate size of the fender for your boat in a reputable sizing chart.

Pontoon boat fender size. The diameter of the fender is the crucial point here. The idea is that you want to fill as much of the diameter of the ropehold with the line in order to disperse the. Designed to stand up against the harshest marine conditions all of our fenders are made from high-quality marine grade vinyl and are available in a wide range of sizes to meet your boating.

This is a standard measurement for the boats fenders size. I use two 8 fenders on my 22 pontoonI only have them on the port side because that is where the side gate is so I always tie up on that side. We like roughly 1 of diameter for cylindrical fenders or 2 of diameter for spherical fenders for every four-to-five feet of boat length.

So if your boat has a length of 30 feet the fenders diameter has to be 6 inches. Fenders are made from marine grade UV resistant vinyl and have an integrated rubber football style valve. The Pontoon Fenders are easy to mount as you screw them directly on to the woodwork and they are ready for use.

DAN-FENDER Pontoon Fenders straight corner can deliver protection of both corners and sides of the pontoon in order to avoid irritating and costly scratches on your boat. An inexpensive secure and durable solution. For every 4 to 5 feet in length of your boat you can have at least 2 inches for round fenders and at least 1 inch for cylindrical ones.

This is not a firm recommendation because fender size also depends on location boat weight and conditions. What size boat do you have. As a general rule of thumb for every 5 feet of a boats length youll need one fender an inch thick in diameter.

Orders are typically shipped within 3 to 5 business days unless otherwise specified by Impact. PLEASE NOTE All orders are custom made. Depending on the size of the boat use a minimum of one fender per 10 foot of waterline but always a minimum of three fenders.