Use a hairpin to make a tie rod and a lock picking tool.

Lock picking with bobby pins. Take bobby pin a shown on the left and. To pick a camper lock using a bobby pin, you are required to have two basic tools: Add tension to the handle of this wrench according to the lock’s turning direction.

First take our bobby pin tension wrench and insert the shorter, closed end, into the lower part of the keyhole and begin to apply slight tension in the direction the key would turn. We are first going to create the tension tool. Then push the lever into the barrel as deeply as possible.

How to use a bobby pins to pick locks. Make sure you keep the. The first thing to do is to create a lever or a.

Get a hairpin and bend the top one third to make it look like a hook. Push the rest of the pin towards the left while bending the end of the pin slightly. Place the shorter end of your wrench inside the keyhole’s bottom.

Stick the pin into the lock about one centimeter with the flat side facing upwards. Bend both sides of the. You can learn to pick pin and tumbler locks with two bobby pins using the following guide.

The kale 164 bne is a turkish dimple lock with 2 rows of opposing pins that meet in the middle. The first step in picking a lock with bobby pins is to create the tools. You need to reverse pick the smaller pins so i cut an.