Open your car's hood and look under the fuse box cover to find the jump start terminal.

Jumping a toyota prius. Ask the other driver to slightly accelerate and hold for five minutes while the battery recharges. Open the hood of the prius. Connect one end of the jumper cables to the positive terminal on the hybrid vehicle.

Connect the red positive jumper cable to the positive terminal in your car. Put your foot on the. Pull the hood release lever on both cars.

The article briefly describes the steps of jumping a toyota prius. You hook it all up directly to the battery with the prius on. Once all cables are in place, start the second vehicle’s engine.

So, these are the toyota prius gas mileage numbers. Jump start the prius start the engine of the assisting vehicle and let it run for five minutes at engine speed by pressing down lightly on the accelerator pedal. When you’re all set, follow the steps below:

Next, follow the steps below: Remove the fuse box cover. Before you jump start a new toyota prius, you will need to make sure that both vehicles are parked with the engines turned off.

Let it charge for at least 1 min for larger engines. If the jump car pulls too much amps, the prius will reboot it's 12v side. The thicker, the better, and that is to help the flow of electricity get from the good battery to the.