Start with the lower and upper shroud turnbuckles open so thread is just not showing inside the barrel of the turnbuckle.

J70 jib sheet length. The 11 long cockpit and moderate height boom in the J70 allow easy crew movement across the cockpit while tacking and jibing. Boat length x 15. Spinnaker sheet blocks outboard of primary winches and aft.

J70 Spinnaker Sheets - Light Air. Normaly Hanse installed a 12mm sheet. Boat length length of the foot.

Jib Halyard 516 T-900. Due to the angle of the sheet the inhauler has the effect of moving the jib lead forward so the more inhaul you use the farther you need to move the lead back. Rail length x purchase 1 Traveller.

Uncovered eye splice for attaching to your existing shackle. The jib-lead holes in the track are typically 1 to 15 inches apart and in heavy air without inhauling we. Schaefer race jib tracks and adjustable cars.

The core of the 8mm Superswift is 5mm and so an additional 2mm SK78 single braid is added to the core to maintain the class minimum diameter requirement. Reefing lines - reef 2. Length is ok but diameter is too big.

Rail length x purchase 1 Spi pole lift. Gasketelastic chord as a preventer from catching sheets 6 Two anodized jib T-tracks 500m x 25mm Builder supplied and located. Available in Endura Braid or Polytech.