Create a tension lever and a pick tool using bobby pins.

How to unlock a door using a bobby pin. How to unlock a door without a key with a bobby pinstep 1make a lockpick and lever using 2 hairpins if you don't have a kit. You may need to peel of the little plastic piece at the end of the pin. Apply minimum torque to the tension wrench, insert the bobby pin into the keyway, make use of a vibrating motion, or scrubbing over the pins, after a few se.

First verify that your door lock is tumbler pin lock. Bobby pins also act as a lock pick, but to unlock the door, the teeth of pins should be of metal, bendable, strong enough, and must fit into the keyhole. Prise the two points slightly apart.

Place the pick tool on the upper part of the. Seized pins are pins that have resistance. Gloves (optional) what to do.

Rate this post contents show 1 how to unlock a car door with a bobby pin 2 creating the pick and tension lever 3 picking the lock 4 picked open using bobby pins. Insert the tension lever at the bottom of the keyhole. Now insert the tension wrench tool (hairpin a) into the bottom of the lock.

How to pick a safe lock using a bobby pin and some patience. Insert the tools and start picking. First verify that your door lock is tumbler pin lock.

Place the lever in the bottom part of the keyhole then turn it like a key. Press the bobby pin forward into the lock— depending on the door, simple forward. Insert the two points of the bobby pin into the lock.