Wrap the stranded wire five or six times around the solid wire strip (stranded wire is more flexible than solid wire).

How to solder solid wires together. Once the solder has cooled, simply slide the tubing over the joint and use a lighter or heat gun to shrink it. Hold the two stripped cables together and then twist the strands of the two cables together. Follow along with this short video to learn how to solder two wires together.car.

You can hold it in place with another alligator while you are soldering it. The first most important step to soldering and establishing a strong electrical and mechanical connection is preparation. Place the piece of wire on the back end of the alligator clip about 2~3mm from the edge.

How to solder wires together correctly like a pro. They should be propped up off the workspace so you can have access to the area under the wires. Return the solid wire to its original shape.

An easy way to solder wires together, simply strip the pvc back, twist the copper strands together, apply some flux and tin the ends, then bend the both ends. A roll of electrical tape and two wires whose ends have been twisted together. The two wires you wish to join together.

Using the wire cutters, cut the two wires to the desired length but ensure they can extend past one another. Using a wire stripper, strip the wires to desired length. Wipe the tip on the brass sponge.

This is a short tutorial on how to solder a couple of wires together. Turn on the soldering iron, adjust the temperature in 350℃ to 450℃ range, let it heat up. Make sure your tip is big enough and.