The depth gauges allow you to check how much tooth your chainsaw has sharpened.

How to sharpen a chainsaw with a file. First, select a circular chain saw file that matches the diameter of the semicircular edge on the cutting teeth. Using a blunt chainsaw is extremely painful and puts unnecessary workload on the operator and extreme pressure on the actual. The first thing to do is to secure the saw.

First, take the cover off of the chainsaw and jam something into place so the chain stays in place. The correct file should sit rightly in the blade curve. Do this a few times, without excessive pressure, but remember to always go.

If you are in landing and did not take a vise with you, then you can clamp the tire by resting it. Loosen the chain lock and then tighten the chain to take up the slack. Guide to filling a chainsaw.

A round file is a tool used to sharpen saw chain cutters. The depth gauges are usually visible. Many of the chainsaw sharpening kits come with depth gauges.

Make sure that the chain is tight to the saw by. It is very important to select the right kind of file size for sharpening the saw. How to sharpen a chainsaw with a hand file.

Clamp the tire in a vice. Loosen the set screws on the file guide and slide the file under the two metal. Put gloves on before you touch the chain, and use a hand file to file down on.