If your pump does not have a union, you will need another hose with hose.
How to set up a pool filter and pump. The pool equipment required for circulating the pool and spa water through a filtering system is shown on the right side of this picture. This equipment consists of the circulation. The pump should be placed at the bottom of the pond but should be easily accessible for maintenance.
Place the hose over the pipe. Complete install instructions for pool & filter. Replacing a cartridge style filter with a new sand filter and pump on our above ground pool.
Once done, connect one end of the hose to the skimmer. The intex filter pump is very easy to install. Grab your hose clamps and place them on both ends of the hoses, leaving them loose.
Unscrew and remove the housing. Use the wall at the. Set filter to rinse (if your valve has rinse mode, if not ship this.
Detailed instructional video on how to choose the location, prep the yard, level the ground, create a soft vapor barrier and set up a bestway steel pro max o. Turn pump on for 2 minutes, or until water out of the waste line looks clean. Attaching a line or rope to the pump allows it to be easily pulled.
Remove the pump housing cover to fill the pump chamber and intake line with water. This rx clear above ground pool sand filter range covers pool sizes from 16000 gallons through to a model capable of filtering a 26000 gallon pool. Place the pump above water level (to cut off the flow of water) open the air release valve (the knob on the lid) remove the lid from the pump.