Now remove two or three horizontal threads from the cuts with your tweezer.

How to rip jeans at the bottom amp. Insert a magazine into the leg, which will prevent the box cutter from slicing through both layers of fabric. Lay on a flat surface. Make 3 cuts 1/2 inch apart parallel to each other on the spot you marked.

For how to rip your jeans at the knee, take the scissors or penknife and do one of the following: The kitchen table or any floor space will work. The first step is to cut a piece of scrap denim fabric that extends beyond the edges of the hole by at least ¼ inch in all directions.

You just need to dab a little bit of fabric glue on both sides of the rip, let it dry for about 10 minutes and then press them together. Mark the height put on your jeans and figure out where you want the new hemline to be. Pumice or sandpaper can also be used to create a distressed look.

The fabric glue will seem like it’s going to come off, but you just. You can do it with waterever you have at your home. Place the denim patch on the inside of the jeans.

Measure off any frays or cuts that may be too close to the seams. You can use cardboard or anything you think is thick enough to act as a. Practice on a pair you won’t wear.

Cut the inseam once you know where you're cutting, grab a pair of scissors. You can use a razor or scissors to scrape the jeans. Use 120 grit sandpaper to lightly thin out and.