You can do this by cutting it with wire cutters or pliers.

How to remove tv mount from wall. Slip it behind the tv and push the tip out towards the front of the tv.it will then swivel up a little. Remove screws holding the tv in place. If there was any lock, i hope that you have.

You also need to pull it a little hard, and you will hear the sound of a click. Place one side of the pliers inside the hole of the wall anchor, and the other. With the zip ties undone, the tv is.

You can do so by undoing the zip ties used to connect the tv to the omni. Next, unscrew the screws that attach the bracket to the wall. Now, go and pull the bottom.

The final step is to remove all of the screws that are located in front of your tv on either side near where its base meets with the wall. Removing the tv from the mounting plate will allow access to a/v component cables. Remove screws holding the tv in place.

Fortunately, you can remove a tv from the wall mount in just 4 simple steps. Do it carefully, so you don’t damage the wall. Either the hardware is screwed into the studs or has drywall mounts which.

Remove the screws from behind the tv. However, you may have to fill the holes on the wall and repaint it if it gets damaged. Basically you remove the tv from the mount and unscrew the mount hardware from the wall.