Purchase the siding removal tool from our amazon affiliate links:amazon usa:

How to remove a piece of vinyl siding. First, reveal the nails that connect the pieces. Carefully bend the panel to free it from the receiving channel. To remove a piece at your eye level, slide the zip tool under the piece above that one.

Pull the piece of vinyl. Look under the siding piece. First, use the end of the zip tool to wedge underneath the.

Using your zip tool, slide it underneath to separate the broken panel from the other siding. Use a cat’s paw or other small pry bar to pull the nails from the course you need to remove. Use the zip tool to unlock the two panels or pieces from one another by sliding the tool under the edge of the siding piece above the one you want to remove.

Remove the damaged vinyl siding. Insert the screwdriver into the bottom locking edge and pry down and out on the edge until you can grab and pull the bottom edge outward and unlock the corner, slide the. Starting at one end of the damaged piece, push the end of the zip siding removal tool up under the siding until you feel it hook the bottom lip.

The next thing to do is to slide the soffit so that there is a gap where you can put your fingers in. Once all the nails are removed, unhook the siding piece by pulling straight down and out. Begin at one end of the damaged piece of vinyl siding.

All it takes is a few minutes and a few simple tools to get access for repairs or modifications to a wall covered with this popular cladding.subscribe to our. However, if you don’t have a zip tool, buy one. Secure the buttlock of the upper panel to the top edge of the new panel, using the zip tool.