Next, pour out the glittered resin onto the surface of the.

How to put keychain in resin. Next, transfer your vinyl monogram onto the acrylic. Measure out equal parts resin and hardener according to the instructions on each bottle. Prep your piece of acrylic by rubbing it down with a paper towel and isopropyl alcohol.

Once that happens, remove the resin piece from the mold. I mixed 1 ounce of each together but that is way more than you need for 1 mickey popsicle mold. Set up your key chains on a flat piece of cardboard.

Pour into one cup and slowly stir for about three minutes. Make sure to burnish the vinyl. The curing process takes about 24 hours for the resin to fully cure.

Stir thoroughly to combine together. First, start by mixing your 2 part casting resin in a 1:1 ratio. Use the stir stick to add some resin to the mold.

Pour into the mixing cup just enough resin to cover the surface. Apply heat gun to pop bubbles. Scrape the sides and bottom well as you mix, until all the white streaks are gone and.

Let me know what you think! There are so many ways to make diy keychains out of resin including adding glitter,. Mix one part resin with one part hardener into the silicone cup.