How to assemble a trampoline net step by step step 1:

How to put a trampoline net on. To install the safety nets properly, you have to follow these steps. Make sure the stakes are as close to the edge of the trampoline as possible, so they’re. To put a net on a trampoline, you need to secure the net to the top of the pole assembly.

Now check the area around the. Assemble the aluminum or steel tubes. To install the net, you will need to hammer wooden stakes into the ground 18 inches deep.

Now you will have to take out the net, unfold it, and spread it over the trampoline’s surface. For a complete list of all of o. Check to make sure you have all the poles, netting, connectors, and hangers that are supposed to be in the box.

Before reaching the last stake once again secure the netting following the. We need to make sure to slide the smaller tubes into the larger notched tubes. In this way, you should attach 4 springs in 4 tips and, after that, attach all other springs one by one.

Setting up the safety enclosure 1. The net’s bottom has to be secured next. First, attach 1 spring to the frame, then connect 1 spring opposite direction.

Lay out the pieces that make up the circular frame to get an idea of how big the trampoline will be. Tie a knot in the rope at the entry zipper’s v. Attach the tubes to the.