The fishing line is a common and old method that is.
How to put a skateboard on the wall. Knot on each end of the rope knot on each end of your rope to makes the rope tight. These two additional bolts mark the gap between. A spanner can be used for tightening these nuts.
Place a washer over each of the bolts on the front side of the plate and secure them with a nut. Step 1 thread both of the long bolts through the back of the plywood plate. In this method to hang a skateboard, you need to remove the skateboard’s trucks.
How to use the boards on the wall skateboard wall mount watch on our deck mount makes it a breeze to hang your skateboard vertically, but if you want to mount your board horizontally we. Now, choose the desired wall location and drill it to hang your skateboard. This is a quick and easy way to do it.
What you will need to hang skateboard deck on wall without nails 1. First, drill two large holes in between where you want your board (s) displayed, then thread these through for mounting purposes. Then, put one screw and gradually all four into their holes.
The wheels of the deck should be secured with the right grip, and you will be able to hang them correctly. But to prevent the rope from fraying, burn both ends of the rope using a lighter. Try to insert the plastic wall anchor into it and then insert the wall screw.
Peel the backing off of one side of an adhesive strip and attach it to the top center of the skateboard. Repeat step 2 for the bottom center of the skateboard. Secure them in place by putting a washer over the bolts and a nut to hold it down.