Measure the height (h) and width (w) of the screen's viewable area, making sure to measure within the bezel.

How to measure for a screen door. Hold the measuring tape parallel to the ground for each measurement. Be careful not to input the reverse. Firstly measure the width of the door frame and secondly measure the height.

Measure out the width starting out from the upper section of your front door, measure out the. For slanted door sills, measure the lowest part that will rest. Then enter the width and length of the purchase.

The door’s width is the smallest measurement. It is also sometimes called the physical image size to distinguish it. Firstly measure the width of the door frame.

If you are installing a screen door, you will use the largest measurement to purchase the door. The measurement of width is slightly tricky compared to the height. Last, subtract 1/4 (or 0.25) inch from the width of your door frame measurement and subtract 1/2 (or 0.50) inch from the height of the frame measurement.

First make sure that the new handle will not interfere. Check your height measurements in 3 places (both ends and the center) and use the smallest of the 3 measurements. These subtractions will solidify the.

Please verify all measurements before submitting. Take three measurements, one across the top, middle and. Record your measurements and take them to your nearest larson dealer.