Place a tape measurer at the centre the cantle measure to the nail head (look at the inch side of the tape measurer not the cm side).

How to measure english saddle. It consists of a tree and a cantle, with two flaps on either side called pommel blocks. How to measure english horse saddle width. The measurement in the center of the button is you seat size.

Using a measuring tape, measure the distance from the center of the pommel at the front of the saddle to the middle of the cantle at the rear. Knowing the seat, flap width, and flap length of your english saddle can be useful. You would start by placing the tape measure (at mark.

To determine flap length, hold the. Use a measuring tape and measure from the center of the button. Start measuring from the top of the metal down to the edge of the flap.

Measuring the saddle seat size is the lesser of two evils. This will give you the correct girth size of your horse. Semi quarter horse, quarter horse, and full quarter horse with.

After doing this, you will have to subtract three from this measurement. A good rule of thumb is that an english saddle seat size will run around two inches larger than a western saddle. Pull the tape snugly and diagonally towards the logo button on the side of the pommel.

English saddle seat sizes are recorded every 0.5 so round. Check the product’s description before buying the good. So, if you ride a 15.5” western saddle, you will likely need a 17.5”.