Yes this is sketchy, i made the 'jig' out of 2x6's and a piece of plywood.

How to level an above ground pool without digging. Once the metal screw is tightly. Mark the pool with spray paint or place rope in a ring to form the shape of a pool. Mark out your pool perimeter.

I’m sure no one wants to reset an intex pool countless times after it collapsed. 1) hammer a stake into the ground where you want the center of your pool to be. Once the ground is leveled, use the.

Wet the sand and tamp it down until it is hard and compact. How to level the ground for a pool without digging, here's how to level the ground for your above ground swimming pool without digging into the ground.we sho. If you're going to try filling to level it, then you'll need to rent a power tamper and buy some rock.

2) tie a length of cotton string that is about 6” longer than the radius of the pool you are. One way to cut costs is by leveling the ground for your new pool yourself. Next, line the nail in your plank up with the.

Take care of the holes and also bumps. It works well and i have used this method a few times to correct the level after a. Once this is done, go to the very end of the wood board (to the side near the level is taped) and hammer the metal screw to that side of the board.

Drive a metal stake into the center. 1.3.1 step 1:draw the perimeter of the pool. Since you want to avoid digging, you can simply build up the lower areas instead of digging away the higher ones.