Pry the chisel underneath the tile and work them loose from the floor.

How to get tile up from concrete floor. You can also use a pry bar to remove. Fix these issues with concrete fillers and sanding/grinding tools, so you’re left with a smooth, even surface. You can do this by placing the masonry chisel at 30 degrees from the edge of the tile, you are.

It's not like epoxy or other glues. Once you have access to the side of the tile, take your floor scraper and hold it at an angle, driving it pretty firmly into the underside of the tile where it's. Just start taking it off with the help of chisel and hammer.

In any case, this process will take a bit of time—somewhere in the range of 30 minutes to an hour. It will make the removal of the tiles easier. The biggest factors are location, size of the project and.

Thinset, the adhesive mortar designed to adhere tile to hard surfaces (like concrete), cures into a cementlike consistency. Pry up tiles with a chisel positioned at a 30° angle under the tile and a hand mallet. Before beginning, put on your safety goggles, rubber gloves, and dust mask or respirator.

Use a scraper to remove as much of the adhesive as possible. You could also mix the water with vinegar to help break down the mastic chemically. If you encounter stubborn tiles, hit the tile with a chisel until it breaks.

The last and final step of the process is raking the adhesive off of the concrete floor. Costs will vary greatly based on several factors. From there, wash the concrete with a solution of muriatic acid (one part).