If you have one then connect it to the dedicated vacuuming inlet at the side of the pool.

How to drain above ground pool with sand filter. Turn on the water so it flows into the pool (removes air from the pipe) detach the end of. Quickly learn how to drain your pool when using a sand filter. After the water is running clear from the nozzle, turn off the power.

As the vacuum water passes through the sand filter, all those tiny particles are trapped there. Using a skimmer vacuum plate. The pump then returns clean water to your pool via a filter pipe which connects it directly to the skimmer of an above.

Turn on the pump for about two minutes. The pump runs water through the sand, trapping the dirt and debris. Turn the pump on for as long as it takes for the cleaner to transfer from the pump into the filter.

Insert the hose to your faucet and turn it on until the water reaches the pool. Throw the one end of the hose inside the pool and fill the garden hose until it becomes filled and fully immersed. To remove the dirt and contaminants from the filter sand, you need to let water flow in the reverse.

Cover the end from the faucet and take it to. Attach the backwash hose to the filter and position the valve to the backwash mode. Do not use abrasive cleaners.

Use a soft brush to scrub the inside of the filter gently. Put the other end in your swimming pool. This will let the water drain from the valve.