Once you locate the sliding tab, pull the spare manual key out in one swift motion.

How to change battery on prius key. By sliding the tab away from the ring and holding it, you can pull the spare out of the base. 2) with the fob buttons facing down, slide the spring. Press the button at the bottom and pull out the emergency key while doing so.

How to change the battery in a prius key fob # step 1. Push in the tab on the bottom of the key fob to release the key. It can be difficult to find the answer for this question, but it is not impossible.

Pull the physical key out. Once the spare manual key is pulled out, focus on the same tab and slide the back of the key to remove the. Where key was inserted you will find a small recessed slot, insert flat head screwdriver and pry open.

The “2013 prius key battery replacement” is a question that has been asked by many people. Test new key fob battery: To start the car, insert the key into the ignition and turn it to the on position.

Test the new smart key fob battery by standing. Once the key is out, you need to slide the same tab over and hold it, while sliding off the. We now move on to the procedure for replacing the battery of the card in your toyota prius:

Stick a flat bladed screwdriver in the hole that the mechanical key. Hope this was helpful to you! To be able to change the battery, you need to remove the key cover first.