Mark the lumber at 12 inches, 24 inches and 36 inches on both ends.

How to build wood steps. Measure your rise height from the line in step 1 to the edge of the board and draw a line. Multiply pitch length by the number of risers to give overall length of pitch line. That will give you an approximate.

Remember that the last “step” will be from the top tread up to the. Cut eight pieces of 2×4 lumber to 36 inches in length. Measure from the run length from the rise point 90 degrees and draw a line.

The stringers should be 2 by 6 in size as a minimum. Lay the side marking the height along the end of the lumber and the side marking the step depth along the length of the lumber. Nails and other hardware should be laying.

Fix two parallel lines down the length of the slope to mark the outer edge of the steps, and two more to mark the top and. Divide “x” by seven inches (an approximate step height) and round off the remainder, up if it's.5 or more, or down if it's less than.5. Learn how we built these wooden steps and handrail for our victorian farmhouse front porch.

When b = 240 mm and a 160 mm, then c = 289mm. Start by marking out your site using a builder's line and pegs. Next, use wood glue or lumber glue to join the boards together into a stair step.

To build garden steps to connect two levels you will need to work out your overall height by run distance. Divide that figure into equal increments, so that you end up with a step height between 7” and 8”. Cut two pieces of 2×4 lumber to 24 inches in length.