Lift the car, place it on jack stands and.

How to bleed brakes by yourself without a vacuum pump. Have a helper pump the brake pedal , fill the master cylinder with brake fluid have the helper pump the brakes several times then hold the pedal down , open the brake wheel cylinder bleeder. Safety first park your vehicle on a flat, dry surface and install wheel chocks. Then pull some vacuum and crack the bleed screw.

Fill a bowl or can with some brake fluid and put the brake pipe’s open line inside it. Park the car in a safe location. Keep the end of the tube under the.

How to bleed brakes with vacuum pump? Go to your wheel’s right rear and carefully turn the bleeder to a half level in order for brake fluid to escape. So, now that you’ve removed the brake calipers from the car, remove the brake pipe off from the caliper.

Stick some 6mm piping on the bleed nipple and a 6mm ring spanner on it (an open spanner will fall off). Open the hood and secure it. Once the vacuum hose is snug, open the bleeder valve and begin siphoning the brake fluid!

Begin by opening the bleeder screws slightly and then depressing the brake pedal. Gather these items 12″ minimum of clear fuel hose an 8mm wrench unmount the master cylinder remove the bolts holding the master. Open the bleeder valve using a brake bleeder wrench before pumping out the old fluid.

Watch the fluid level in the reservoir. The vacuum bleeder is also a very useful method to learn how to bleed your brakes by yourself. You will need to use a brake pedal bleeder kit and a helper.