Get a transfer tape, and cut it at least 1cm bigger than the vinyl decal you have.

How to apply vinyl decal to cup. How to apply vinyl decal to cup. While still holding onto your decal, taping the edges will help you get a better sense of placement. Remove the tape and set mug aside.

Remove the backing and place the sticky side onto the front of the decal. Take the backing paper off the transfer tape. Use transfer tape to transfer the permanent adhesive vinyl.

Clean the surface of your mug first with 91% isopropyl alcohol. Use a dry erase marker to draw a straight line along the top edge of the tape. If you don’t have any rubbing alcohol then simply give it a.

You can use a brush, or spray the vinyl on using a canister. Peel the paper off the back of the vinyl (the vinyl should be sticking to the transfer tape). Apply the vinyl decal to the mug, smoothing from the inside to the outside to avoid wrinkles and bubbles.

Tape the decal at the top edge using the biggest masking tape. Carefully and slowly remove the transfer tape by starting at the corner of the. Decide where you want to stick the decal.

Tape the top edge of your decal to the surface with masking tape. Cut a piece of transfer tape the same size as the decal. Next, you just need to apply the decal to the cup.