Get a hairpin and bend the top one third to make it look like a hook.

How ro pick a lock with a bobby pin. With the second bobby pin your putting a little pressure to the direction that the lock turns which causes the pins to get stuck by the tiny ledge that you just made inside the lock. Stick the pin into the lock about one centimeter with the flat side facing upwards. To achieve the right bend,.

I'll just stick to using my plastic orange juice bottle key. Level 1 · 2 yr. With enough force most locks can be undone pretty easily.

It’s also not very difficult to do,. To pick a camper lock using a bobby pin, you are required to have two basic tools: Apply minimum torque to the tension wrench, insert the bobby pin into the keyway, make use of a vibrating motion, or scrubbing over the pins, after a few se.

Add tension to the handle of this wrench according to the lock’s turning direction. Then insert hairpin b into the middle of the lock all the way back. What you will do, is take the bobby pin and insert it through the side of the lock (the part where the lock goes).

The actual lock picking happens with the picker. Now insert the tension wrench tool (hairpin a) into the bottom of the lock. Insert the tools and start picking.

The function of this instrument is to implement a. First of all, insert the lever you formed from the bobby pin into the bottom half of the lock. As soon as the tensioner is in place, you can try to manipulate the pins with the lock picker.