It’s one of the most easily noticeable signs of water damage, and in.

Hardwood flooring water damage cupping. In many cases of slight to moderate wood floor cupping, eliminating the source of the water and drying out the flooring can save the floor. Hardwood cupping is where the edges of a board become higher than the centre. However, if the problem is extensive, it may be necessary to reinstall the entire floor.

Water damage happens when water is allowed to saturate a hardwood floor often the result is a condition often referred to as cupping. Water can damage hardwood floors—and it will happen quite quickly. Excessive moisture also creates buckling in solid wood floors, engineered wood, and laminate.

Because wood is naturally porous, it can easily absorb moisture. After all, both engineered and solid hardwood consist of real wood, which warps when it absorbs water. Cupping is caused by a moisture imbalance through the thickness of the wood.

High natural ambient moisture in one locale (hot and humid) may be best served with a 12% mc floor board while the “correct” mc for wood flooring in a desert dry environment. This usually produces a concave shape. The first step is to solve.

Warping, cupping, lippage, splitting, buckling, and bubbling are some of the mains problems that occur. Both solid and engineered (made up of. The wood flooring, however, doesn’t come without a few limitations.

Cupping is when moisture soaks into the edges of a wooden plank, causing the edges to expand and lift up and. This allows the floors to be fixed right away, and may be cheaper than paying for them to be dried out. Just a small amount of water can cause.