As much as possible you should try to soilder it.

Connecting wires without solder. There is ways to connect wires properly without soldering (it involves conductive electrical paste). To use a heat shrink butt connector, first strip the insulation from the end of each wire. I'm in the process of building a 16x16x16 led cube and am looking for a way to connect two wires at a 90 degree angle (e.g.

Then, twist the strands of wire together and insert them into the connector. A roll of electrical tape and two wires whose ends have been twisted together. For crimping two wires together, you will need specialized tools.

4 ways to connect a wire without soldering. The advantages of this over crimping or soldering are speed, reliability, an. Once that is done, you will twist the wire together very tightly.

Just make sure that electrical contact is made then apply and quick fixing glue. Luckily, there are several options for connecting a wire to a circuit board without using solder. The best way to splice wires is to wrap them together tightly, using multiple twists to ensure maximum contact between the two wire sections.

But in emergency conditions you may try glue. First, lay the twisted part of the wires onto a strip of electrical tape. +) without soldering them together.

A quick tech tip to let you in on this technique for joining two wires together. Crimp connectors are a good replacement for connecting wires without soldering. When connecting a wire with a heat.