The first thing i did was measure the height, width, and depth of my light fixture so i.

Changing vanity light fixture. Test the light by turning the switch on. Then unscrew the silver caps that surrounded the neck of each bulb. Updating light fixtures by replacing with wireless light fixtures.

On the stranded wire, strip off 5/8 in. Turn off the electricity to the circuit at your home's main electric box, as bob vila recommends. Disconnect the ground wire from the.

Stand a stepladder at the area of the vanity light. When you have each wire nut in place, give the wires a gentle tug to ensure that they are snug. Turn the light switch on and off to test the circuit.

Remove the lamp, or lamps, that cover the light bulbs on the light. The grounding screw typically has a green head, but refer to the manufacturer's. Adding to the challenge was the fact that the fixture wasn’t centered over.

Follow these steps to install your new vanity light once you shut the power off: The fixture’s exterior plate should now be free to pop off and. Twist the black wires from the junction box and the light fixture together.

Turn off power to the light at your home's main electrical panel. If the lights go on, return to. Simple bathroom vanity light fixture update.