The first thing to check is whether you have a leak or not.

Chainsaw leaking bar oil when not in use. If you find that the oiler is not providing enough oil to lubricate the bar,. Also, let me remind you that ventilation issues are. Oil still present on guide bar 48 hours after last run.

There is also oil inside the groove of the guide bar that will gradually run downwards to the. Doing so should prevent most oil leaks during active use of your saw and while it is in storage. Oil leaking from a chainsaw is a common occurrence and does not signify an issue with your chainsaw.

One, you may drain the saw’s fuel, bar, and chain oil, so there’s no risk of it leaking. Almost every chainsaw will leave oil residue before, during, and after use. Two possible causes, the fill plug is not sealing or the oil is syphoning through the line that oils the chain.

To fix this, remove the chain and bar from your chainsaw and clean the oil hole and oil outlet port. 3.3 stop a chainsaw oil from leaking 3: 3.1 stop a chainsaw oil from leaking 1:

To avoid leaking or spilling oil from your chainsaw, check if the amount is normal. When storing if the chainsaw is tilted in an angle which can leak from the valve. Oil is pumped through grooves around the chain bar to ensure the chain and bar are.

Air pressure built up in the oil tank. In most cases, there is nothing wrong with the chainsaw and what appears to be an oil leak is just oil that has sprayed from the chain as it rotates at high speed. To lubricate your bar with the chainsaw bar oil, you should follow the steps below: