So that you know, stiff bristles can scratch the wood's surface.

Wood floor finish instructions. Use a scouring pad dampened with mineral spirits for tough areas. For general cleaning, spray an area 4’x4’, or spray directly onto microfiber pad, making. Existing hardwood floors that have become unsightly from wear or neglect is also covered.

Apply the first of two coats of finish wax or other floor finish, such as polyurethane or varnish. Follow the directions on the finish container for drying time between coats. Refinishing wood floors & procedures for finishing hardwood floors.

Periodically moving rugs and furniture, and keeping shades on windows during intense, direct light times of the day, will allow your hardwood to age and. Ensure that material submittal and subcontractor are approved by the consultant. Stained wood floors previously finished wood floors and factory finished laminate with minor stains and scratches.

Use the microfiber mop to evenly spread the restorer, working in the direction of the grains/planks, before moving on to the next area of your floor. Low odor and low vocs; Sweep or vacuum the floor before you move up to the next grit.

Minwax® ultimate floor finish works well for any hardwood floor and is ideal for light colored woods like maple and over light colored stains. Sand the floor carefully making sure not to miss any. Begin by thoroughly sweeping floors with a soft bristle broom.

When finishing a floor, consider the sun and either cover the windows with plastic or plan the job early in the morning or late in the day. Any wood floor sanding and refinishing should be done by a qualified wood floor professional. Bona waterborne sealers are made to penetrate, seal and set the overall tone of the hardwood floor.