Tackling replacement of the wiper motor on your renault will be a lot easier using the pdf instructions and video tutorials listed here.
Wiper motor replacement instructions. There are several sizes of these motors. Remove the old wiper motor assembly next, use your ratchet to remove the bolts holding the. Lift the wiper assembly and disconnect the electrical wire from the wiper motor by pressing the connector then pulling it away from the motor.
Generally, the wiper control module is located under the dash, but it can be found in other places as well. The wiper motor shaft is the central rod that runs through the motor and on a bearing at each end. These screws will be found at the base of the back.
Replacement wiper motor how to: It shows 12v, see the photo. If there is 12 volts at the motor, but it doesn't run, the wiper.
Install the new windshield wiper motor. This is my vacuum motor. If you have the motor connected to the linkage assembly, slide the linkage parts into the space where it connects to the rest of the wiper system bolt everything into place replace.
The following instructions cover the removal of the wiper motor and its mechanism. Get inside the car and remove the screws that hold the rear wiper motor in place. Remount the windshield wiper motor back onto the.
524,234 views oct 28, 2010 windshield wiper motor replacement. If you have a hard time. It holds the armature, allowing it to spin freely when the motor is in.