There are a few ways to fix the whirlpool washer door locked flashing light issue.

Whirlpool direct drive washer door locked light flashing. This is a common issue with these. Whirlpool washing machine flashing red light said door is locked. That is, there are issues with the drainage system, and the faulty drain pump has to be replaced right away.

Pull straight back and up to take the top panel off. The door should unlock after 60 seconds. Whirlpool washer door locked light flashing.

First, switch the breaker off, or unplug the washer for at least 1 to 2 minutes. Take some water and vinegar solution are. For this, you have to put off the breaker and open the wires in the whirlpool machine using screws.

You can also press and hold the cancel button for one to two minutes. I am running some test cycles on this 24 compact clothes washer that has been sitting in storage for a while. Unplug the washer from the wall and pull it forward.

Nothing else will appear to be happening with the machine during this time. Solution for the problem in actuator motor. My washer was stuck in the locked position and this is how i fixed it.

The door locked flashing light might generally indicate two things. Remove the screws on the back of the top panel. Doing this allows the control panel to reset which could trigger the door to release and open, and also.