Look around and you will find pontoon boats everywhere including your lakes rivers and waterways.

What are lifting strakes on a pontoon. It might look like planning but its really more like plowing. He mentioned they have added them in years past to boats not factory ordered with this option and performance was maybe a 1 mph. Fin System the water is channelled back down creating lift increasing control and performance.

Typically lifting strakes are a piece of sheet metal used to deflect water. Bennington 22sslx underdeck wave shield on the waterWe ran the boat from 0-30 mph. Fin System Works View From Back of Pontoons Competitors Lifting Strakes TAP.

Because lifting strakes give your boat some extra elevation they boost speeds by up to 25. Adding more power to a planing hull results in increased speed. This video shows what happens from 5 to 35 mph on a 25 foot Tritoon.

There is also a significant amount better MPG because the boat is on top of the water rather than plowing through the water. The only thing that improves pontoon boat speed is more power. After discussions with motor dealer and talking with Bentley reps the prop I have on it now is a 157515 pitch SS prop.

Lifting strakes are blocks of metal that are welded directly onto the pontoon tubes themselves to generate lift allowing your boat to lift and glide above the water instead of tearing through it. The two choices you have are to fully weld the strakes or remove them plug the leaks and then re-weld them on. Fin System With the TAP.

Pontoon tubes have a rounded shape and they immerse more than halfway in the water. The short answer is no you boat doesnt plane nor does the example party barge you describe. My problem is that the best I can do before prop blowout occurs is about 4200 RPM.