Mix the enzyme powder according to the instructions and saturate the area you are treating.

Wetting hardwood floors before staining. Don’t get ahead in wetting the edges with stain before the middle areas. Also, the stain will start. If there are stains and oils on the hardwood floor, the stain will not stick very well to the hardwood floor.

If you have access to a moisture meter, test the wood moisture. Begin by thoroughly sweeping floors with a soft bristle broom. The sheet will help to collect tannins and filth that fall off the wood.

7 things to know before you refinish hardwood floors. Stain process start to finish. Lots of people recommended “water popping,” which is basically wetting down the wood to open up the pores more for the stain.

Apply the second coat of stain, wipe. Allow the dampened wood to dry 30 minutes before the final sanding. Similar to paint, you want to know what color you’re leaning towards in advance, but it’s still important to test it on your floor before moving forward with your final decision.

A good middle ground is to allow the project to sit overnight between coats of stain. Let the project sit for a minimum of 2 hours, preferably up to 24 hours. Place a large drop sheet on the floor around the wet wood to do this.

The main deciding factor is if the floor is a hardwood with. 7 clever ways to clean old hardwood floors. These minor marks will be less visible when applying a.