Check the water level, then set the valve to “filter” and switch it on.

Vacuuming algae with cartridge filter. Vacuum green algae through your filter (only if you have no other alternative) if you have to vacuum through your filter, ideally you will want to use an old cartridge that you. Alejandrin homenick | last update: You need to pause briefly.

Prior to vacuuming your pool, you need to make sure the water level in your pool reaches the level where you have your skimmer. First remove all debris from your pool, then add chemicals to the water and brush the walls and other surfaces. However, this can only work if you have a multiport system or a waste line system in your cartridge filter.

Start to vacuum but try to move the vacuum head along the bottom slowly in order to disturb the algae. Vacuum your pool in the same. The dead algae is likely too fine to be vacuumed through your sand filter, therefore owners of sand filters must vacuum on.

This product features a long hose, which measures 30 feet. So, we recommend the vacuum for people with a swimming pool size of about 50 feet. In this video i show how to vacuum to waste, and get dead algae out of my pool.

Better suction vacuum systems will use a cartridge filter insert that traps small particles of silt and grime, either in place of, or in addition to, a mesh debris basket built into the vacuum unit. All you need to do is bypass the filter and pool vacuum for algae to the waste. This video will show you how to vacuum and remove algae off of the bottom of your swimming pool so that it does not go back into the water.in the swim pool p.

Algae can ruin your summer pool season if you don’t get it under control. Cartridge filter owners can vacuum up the dead algae but need to clean the filters thoroughly after doing so. Set the multiport valve of the filter to the waste position and switch on the pool pump.